Onyehn 5pcs/Lots UV FEP Film Release Films(200 x 140 x 0.1mm) for Photon Resin 3D Printer,3D Printer Parts for ANYCUBIC Photon Duplicator 7 SLA DLP 5.5 inch LCD

I was a little concerned that these would be exactly the size of my vat floor. That wouldn't work for me as I'd need extra material to be able to mount this across a tension frame. But the film is perfectly the right size for my ANYCUBIC Photon stock vat. It stretches to fit if you do it right, without losing tension.I'm a novice, so maybe I'm doing something wrong, and also my print bed doesn't do a servo tilt release. I had issues with my first skin replacement having prints stick to it. The film demonstrated its durability by holding up to scraping from a plastic spatula to get the cured print off the surface. Once I got it clean of debris, I washed and rinsed it. Then I experimented with spraying WD-40 on a paper towel and giving a very slight coat to the film on the resin side, the part inside the vat. My next couple of prints were flawless, perfect release from the film and all. I will definitely purchase this film from this vendor in the future.

These FEP sheets work great with the Anycubic Photon. They are a bit larger than the Anycubic sheets, but not by much. After installing, simply cut the extra off the edges with a sharp X-Acto blade and you're good to go.I've printed on the first sheet with Anycubic Grey for about 100 hours, then started adding about 20% Tenacious and have printed another 20 or so hours.

I haven't used this yet but it is advertised at being .15 mm thick and when I opened the package I see that it is .1 mm thick. I would not have ordered this if it had been advertised correctly. I hope it holds up and if it does I'll alter my review based on how it worked. I'm not happy with the false advertising though.Edit on 3/17/21I see where the description has now been changed to reflect that these are only .1 mm. Good for them for doing that but my purchase was when it was advertised as being .15 mm.These have worked pretty good so far. Not unhappy with the item.

Installed this and works just like OEM!

This plastic film appears to be something other than FEP. It is softer and more prone to tearing when stretched. The first film ruptured, spilling resin into my printer. I am trying a second sheet as a test but if it fails as well I will junk them.

All 5 sheets failed on the first print! One even tore and spilled resin all over the LCD of my Photon. I would not recomend using these. I went back to the Anycubic FEP and have been printing fine ever since.

Useless product, it failed in every first print. Not a single one worked. Very upsetting.

All five sheets failed the first print. The resin sticks to the sheets.