LEADSTAR 24V 15A 360W Switching Power Supply Driver Converter Adapter for LED Strip 3D Printers

Easy instal no problem with it , still going strong

Bought as my old one actually went I changed power packs ,works great

Got this for some LED strips above my kitchen cabinets. It worked fine but the fan was quite audible so no good for my usage. Returned no problem

Fan is a little noisy but cracking driver with no high pitch squeel like some transformers.

I bought this to replace a near identical one which failed after a year or so.First thing I noticed, the fan is on continually. It instantly ramps up to full power as soon as there is any current draw above about 0.5A. This is clearly not thermally controlled, but controlled directly on current draw. The power supply it replaced had thermostatic control of the fan. Having a fan running continually is basically unacceptable in many applications.I looked inside, and found that the two thermal components were missing, and their slots had been short circuited. I've attached photos showing the comparison of the old and the new, clearly showing and identifying the missing components.Replacing these components works quite well - the fan at least doesn't run until the temperature increases above 45C.Other observations - the missing thermistor slot was shorted with two desktop staples. Several screws were stripped. The thermal paste on the transistors was inadequate.All in all, this is a thoroughly "Chinese" product. 90% of the way there, very close to being a good power supply, but to save a few pennies they have utterly destroyed the overall quality.Next time, I'd buy a quality controlled component from RS or Farnell.I've still given it 2 stars as it does, at least, provide the rated voltage, and is quite stable.

Ottimo rapporto qualità prezzo usato per strisce led

De mometo va perfectamente lo compre para sustituir la funte de alimentación de mi inpresora ender 3 y el voltaje es perfecto aun que es un poco mas ancho que la original tuve que cortar un poco el plastico que sujeta la fuente para que encaje pero nada grave por el precio le doy 5 estrella

Die Lieferung hat einige Wochen gedauert (China-Produkt) und die Verpackung war mehr als ausreichend. Ich habe das Produkt zum Bau eines CNC-Schaltschrankes eingesetzt (siehe Bild). Das Bauteil ist nicht VDE konform, macht jedoch einen ordentlich verarbeiteten und unbedenklichen Eindruck. Die Spannung lässt sich über einen Poti justieren und somit genau einstellen. Alle Kontakte sind gut isoliert und das Gehäuse ist geerdet. Der eingebaute Lüfter läuft dauerhaft jedoch vibrationsarm und leise. Die Langlebigkeit des Produktes kann ich derzeit noch nicht bewerten.

Très bon produit pour les personnes qui découvrent l’impression 3D. Prise en main assez facile . Très bon service après vente suite à un problème d’alimentation , réponses rapides .

Todo correcto y rápido