EASYGrout - Dark Grey Colour - high-Quality slurry Grout for use on Porcelain Paving

Description

EASYGrout is a slurry grout for use on porcelain and most other paving materials. It is available in three colours and is suitable for grouting joints internally and externally around ceramic, porcelain and natural stone tiling and clay paving slabs, filling joints from 5mm up to 25mm wide with a minimum joint depth of 20mm. Available in 15kg tubs and also packed in 3 x 5kg bags for more economic mixing - less waste. Before you start to use the product:Always ensure the tiled and paved area is stable and secure before proceeding with grouting of the joints. Ensure all joints are raked clear of any excess loose residues and accumulations of water to allow an even and consistent depth of grout to be applied in all areas. Note: Certain types of tile and stone slab may be unduly porous and hence prone to surface discolouration, especially when applying coloured grouts. Natural stone and porous, un-glazed tiles are particularly at risk from permanent discolouration. To avoid this always carry out a small trial test, applying freshly mixed grout to a spare tile to determine whether staining is likely and consult the tile manufacturer as to whether they recommend a suitable sealing compound to protect the surface. Immediately prior to proceeding with the application, dampen the whole area to ensure the tiled surface is wet (not soaked) prior to grouting the joints. Mixing up: Always add powder to clean, cold water and using a powered paddle mix a minimum of 900ml of clean water (more can be added slowly to achieve optimum consistency) per 5kg sachet of EASYGrout powder whilst slowly mixing for 3 to 5 minutes to give a smooth lump-free readily flowable cohesive mortar. Do not over-mix or create excessive air bubbles.